Waste gas and liquid aspiration in one unit!

This waste gas evacuation system utilizes a sealed evacuation unit to remove waste gases to the outside air. This is an OSHA compliant method of removing waste gases from the anesthesia machine.

Manufactured with the highest quality, ultra quiet, American made motor. It’s maintenance free design will provide years of trouble free service.

The EVC3100 is designed to work with industry standard wall or ceiling outlets.

Features:
Built in circuit breaker
Hour meter
Stainless steel enclosure
Permanent mounting brackets
5 year or 10,000 hour warranty

Capacity: 1-20 Anesthesia Machines
5 anesthesia machines and 2 liquid aspiration outlets
10 anesthesia machines and 1 liquid aspiration outlets
20 anesthesia locations using standard WAGD wall outlets

Inlet & Outlet: 1/4 NPT Male pipe thread

Electrical: Voltage: 115, Hz: 50/60 Full Load Amps: 4.0

Agency Compliance: UL Recognized US and Canada (E47479), Certified to UL-507 standards from TÜV-SÜD America Inc. Certified for US and Canada

EVC3100 Waste Gas Evacuation and Liquid Aspiration System
$795.00

Be OSHA compliant with our TUV/UL certified waste gas evacuation system!

Can be easily added to existing hospitals.

This waste gas evacuation system utilizes a sealed evacuation unit to remove waste gases to the outside air.

This is an OSHA compliant method of removing waste gases from the anesthesia machine.

Manufactured with the highest quality, ultra quiet, American made motor. It’s ball bearing motor has 5 times the life span of a plain bearing motor and uses less electricity.

No need for expensive balance valves in the ceiling or wall when used with the EVC680 outlets. The vacuum flow remains the same at all outlets.

Features:
Built in circuit breaker
Hour meter
Stainless steel enclosure
Permanent mounting brackets
5 year or 10,000 hour warranty

Capacity: 1-30 Anesthesia Machines

Inlet & Outlet: 2” PVC or ABS Pipe

Electrical: Voltage: 115, Hz: 50/60 Full Load Amps: 0.30

Agency Compliance: UL Recognized US and Canada (E47479), Certified to UL-507 standards from TÜV-SÜD America Inc. Certified for US and Canada

EVC3000

Waste Gas Evacuation System
$625.00

EVC3050

Multi Station System $1075.00

Includes - Basic set up for 2 anesthesia stations (upgradeable to 30 stations using EVC650 outlets)

Kit includes:

EVC3000 evacuation unit (above)

2 each EVC680 outlets

2 each EVC630 waste gas interface (one per machine)

top of page

A waste gas interface device must be used if you have an active scavenger system. Negative pressure (vacuum) is created when using a fan or pump to remove waste gases. By balancing pressures between the anesthesia machine and the active evacuation, the device eliminates the possibility of having a "light" patient due to excess negative pressure.

This item includes 20 feet of 22 mm clear tubing, 4 feet of 19 mm tubing, and mounting hardware. This item comes with a 5 year warranty.

EVC630 Waste Gas Interface
$225.00



top of page

.............................................................................................................

A waste gas interface device must be used if you have an active scavenger system. Negative pressure (vacuum) is created when using a fan or pump to remove waste gases. By balancing pressures between the anesthesia machine and the active evacuation, the device eliminates the possibility of having a "light" patient due to excess negative pressure.

This item includes:
0-10 lpm flow meter with 1/4” hose barb
4 feet of 19mm blue tubing
3 liter reservoir bag
Mounting hardware (for all 2” post)
5 year warranty

Capacity: 1-10 lpm flow
Inlet: 19mm
Outlet: 1/4“ hose barb

EVC629 Waste Gas Interface Valve With Flow Meter
List Price: $280.00

top of page

These outlets have engineered flow rate compensators to balance the entire system. No ceiling or wall valves are needed to control the flow rate. Use with EVC 630 Waste Gas Interface.

This item includes wall/ceiling rough in box, 19/22 mm tubing, nipple and wall cover trim plate. Uses 1/2” Schedule 40 PVC pipe to plumb.

EVC680 Evacuation Wall
and Ceiling Outlet
$52.00



top of page

.............................................................................................................

The waste gas scavenging outlet can be used in wall or ceiling. Use with EVC 629 Waste Gas Interface.

Please specify waste gas (WADG) or Suction (aspiration) outlets
Connects with 1/2” copper pipe

Wall or Ceiling outlet
(specify when ordering)
$78.00

This gage verifies the evacuation system is on and flowing enough to evacuate the waste gases effectively. Use with any fan style evacuation system. Use with the EVC680 wall/ceiling outlets.

Verifies a 7 lpm minimum flow rate
Inlet: 22mm male for all active systems

EVC650 Waste Evacuation Gage $38.00


top of page

.............................................................................................................

These charcoal canisters passively trap halogenated waste gas from the anesthesia machine ensuring the safety of your staff. Convenient for portable machines and for hospitals without an active scavenger system.

This item includes the F-air canister, canister bracket, 22mm x 19mm adapter, 4 feet of 19mm blue tubing, and mounting hardware.

Note: the M2000 is pre-drilled for easy mounting.

EVC555 F-air Canister Kit $39.50

EVC554 F-Air Canister (12 - 15 hour life span) $8.75

EVC556 F-Air Canister Bracket $12.25

top of page

.............................................................................................................

Our durable 19 mm blue and 22 mm clear evacuation tubing safely encompasses waste gases as they exit your anesthesia system. Sold by the foot.

Note: 19mm Blue evacuation tubing is typically used with passive evacuation systems and 22 mm clear evacuation tubing is typically used with active evacuation systems.

EVC537 19 mm Blue Evacuation Tubing $1.75/foot

EVC538 22 mm Clear Evacuation Tubing $1.75/foot

top of page